Controller Issues
Hi,
after having my live steam in sotrage for some years I recently brought it out to test it. I am getting power to the transformer but do not seem to be getting any power to the controller. Does anyone know a way of testing the cable that connects the 2? I am hoping it is just the cable that is faulty and not the controller. Last time I used it it worked without issue
73 Views
- There shall be 17 volt DC between the female pins 2 and 4 of the cable when connected to the transformer. (Connector pins are labeled.)
- The male pins at transformer and controller are slotted. Widen these slots with a small knife or screwdriver just a very little bit to improve contact with the female connectors.
- Make sure the controller rear switch and the heater are switched on, otherwise the controller looks dead.